How to Restore Stock Firmware in Moto E 2nd Gen ?

Hello friends here is all new post for you. Now you can restore stock firmware in your Motorola Moto E 2nd gen.(XT1524) i.e. Android Lollipop.

Now start with guide/tutorial to install/flash stock firmware in your Moto E 2nd gen.

# Step to Install STOCK FIRMWARE Android lollipop on Moto E(2nd gen.):

1. Turn off your mobile and then hold the Volume Down + Power buttons simultaneously for a few seconds. After few seconds release it and you will get into Moto E Bootloader.

2. Now, connect your Moto E (2012) to your PC via USB cable, go to the folder where the firmware is located and launch a command window from there (Press Shift key, right click and select ‘Open command window here’)

3. Now type given below commands and execute them step by step:

mfastboot oem fb_mode_set

mfastboot flash
partition gpt.bin

mfastboot flash
bootloader bootloader.img

mfastboot flash logo logo.bin

mfastboot flash boot boot.img

mfastboot flash recovery recovery.img

mfastboot flash system system.img_sparsechunk.0

mfastboot flash system system.img_sparsechunk.1

mfastboot flash system system.img_sparsechunk.2

mfastboot flash system system.img_sparsechunk.3

mfastboot flash system system.img_sparsechunk.4

mfastboot flash system system.img_sparsechunk.5

mfastboot flash modem NON-HLOS.bin

mfastboot erase modemst1

mfastboot erase modemst2

mfastboot flash fsg fsg.mbn

mfastboot erase cache

mfastboot erase userdata

mfastboot erase customize

mfastboot oem config carrier vzw

mfastboot oem fb_mode_clear 

You can also use given bat file to execute the above code automatically, for download click ‘MotoEXT1524flashall.bat’ file, place it inside the firmware folder and run the file.

4. Now, if you want to relock your Moto E 2nd gen's bootloader, type the following command and press enter 

mfastboot oem lock

5. Now, reboot your device by typing below command

mfastboot reboot

Comment below for any assistance